Laboratory Press 10 Ton
Pneumo-hydraulic manual press for testing on ceramics samples. Essentially consisting of one pneumo-hydraulic cylinder with pressing force applied by means of hand. The maximum force from the cylinder can be adjusted by the operator up to 10 T .Once manually charged inthe mould the powder is being pressed by the cylinder up to the maximumpressure request. As soon as the cycle is over the sample can be taken out with the same cylinder. The press come without mould, that should be ordered on request.
The moulds are avaible on request.
TECHNICAL SPECIFICATIONS
• Max pressing force 10 T
• Steel frame epoxi painted
• Max force reading on the manometer gauge Ø 150 mm
• Easy change mould
| Code | Model | External dimensions | Maximum force applied | Max pressure | Weight |
|---|---|---|---|---|---|
| GT0798 | PRESS 10 T | 450x310x985 mm | 10 Ton | 500 Bar | 45 kg |
| Code | Description | Image |
|---|---|---|
| GT0762 | Steel mould Ø 30 mm | |
| GT0763 | Steel mould Ø 40 mm | |
| GT0764 | Steel mould Ø 50 mm | |
| GT0765 | Steel mould 40x80 mm |
Related products
Laboratory Press 30 Ton
Description:
Manual hydraulic press for ceramic specimens with max force of 30T. The press is supplied without a mold, to be ordered separately.
Category:
PressesStandard:
Laboratory:
Raw Materials LabManual hydraulic press for ceramic specimens with max force of 30T. The press is supplied without a mold, to be ordered separately.
Laboratory Presses 40-60 Ton
Description:
Semi-automatic hydraulic press for ceramic specimens with max force up to 40 or 60T depending on the model chosen. With the automatic version can be…
Category:
PressesStandard:
Semi-automatic hydraulic press for ceramic specimens with max force up to 40 or 60T depending on the model chosen. With the automatic version can be programmed up to three presses and three fillings. The filling of the mold is performed manually by the operator. The press is supplied without a mold, to be ordered separately.
Presses 80-225 Ton
Description:
Hydraulic press for laboratory or for small productions of special pieces. Produced in three different versions of 80,120, 225 t of max force and suitable…
Category:
PressesStandard:
Hydraulic press for laboratory or for small productions of special pieces. Produced in three different versions of 80,120, 225 t of max force and suitable for producing ceramic tiles, laboratory samples, refractories, bricks, etc. The press is supplied without a mold, to be ordered separately.