Leak-tec module for sanitary ware
The LEAK-TEC module is designed to perform tests on all types of toilets to avoid leaks of liquids or potential contaminated vapors. The results of the process are recorded thanks to a control software and a very simple and direct user interface. The machine uses a “Venturi” pump to make the vacuum. Generally it is installed on the final control lines allowing to perform the “leak test” on the entire production of toilet bowls.
TECHNICAL SPECIFICATIONS
• Inlet air: minimum 6 bar, maximum 8 bar
• Vacuum sensor: from 0 to 1 bar
• Plc 16BIT: 50 masce machine cycle 6 + 6 digital in / out 4 analog inputs (1 used by the sensor)
• Power supply: 220 Vac Total power 90 W
• Dimensions: Width 520mm, Height 1320mm, Depth 950mm
• Weight: 70 kg (without fitted toilet)
| Code | Model | External dimensions | Power | Voltage | Weight |
|---|---|---|---|---|---|
| GT2442 | LEAK-TECH-SAN | 520x1320x950 mm | 90 W | 220 Vac | 70 Kg |
| Code | Description | Image |
|---|---|---|
| GT2443 | Two-component silicone plate | |
| GT2444 | Silicone plate | |
| GT2445 | Caps for sealing | |
| GT2446 | Water inlet kit | |
| GT2447 | Water outlet kit | |
| GT2448 | Siphon cap | |
| GT2449 | Inhalation of the siphon cap | |
| GT2450 | Electric control pedal | |
| GT2451 | Vacuum system - 0.8 bar |
Related products
Flush-tec module for sanitary
Description:
The FLUSH-TECH module is designed to perform drainage tests, basin washing and outdoor splashing according to EN 997 and AS 1172.1
Category:
Miscellaneous EquipmentLaboratory:
Sanitarywares LabThe FLUSH-TECH module is designed to perform drainage tests, basin washing and outdoor splashing according to EN 997 and AS 1172.1
Load-tec module for sanitary ware
Description:
The LOADTECH MODULE is produced to accomplish the static load test on WC and wash basin. With additional floor tools the machine is suitable to…
Category:
Miscellaneous EquipmentStandard:
EN 997Laboratory:
Sanitarywares LabThe LOADTECH MODULE is produced to accomplish the static load test on WC and wash basin. With additional floor tools the machine is suitable to do Static Load test on pedestral WC , Bidet, Shower Tray and Kitchen Sink.
Shock-tec module for sanitary ware
Description:
The SHOCK-TECH module performs the temperature change test (thermal shock) and determination of the overflow flow rate for washbasins and bidets and is built with…
Category:
Miscellaneous EquipmentStandard:
EN 997Laboratory:
Sanitarywares LabThe SHOCK-TECH module performs the temperature change test (thermal shock) and determination of the overflow flow rate for washbasins and bidets and is built with the dimensions required to accommodate any washbasin (single and double washbasin, wall-hung washbasin and column washbasin).
Seat-Tec Module for Sanitary Ware
Description:
Test module for testing toilet seats as durability tests, static load tests, lateral load tests.
Category:
Miscellaneous EquipmentStandard:
Test module for testing toilet seats as durability tests, static load tests, lateral load tests.