Shock-tec module for sanitary ware
The SHOCK-TEC module performs the temperature change test (thermal shock) and determination of the overflow flow rate for washbasins and bidets and is built with the dimensions required to accommodate any washbasin (single and double washbasin, wall-hung washbasin and column washbasin). The washbasin is mounted on the module with wall fixings. It has two separate hydraulic circuits, one for cold water (15 ° C) and one for hot water (70 ° C). Both hydraulic circuits recycle the water used for each individual test. A flow meter is used both to adjust the flow rate during the 5.4-1 and NF tests, and to read the flow rate during the 5.9 and 5.4-2 tests. The 5.4-1 test must be performed a certain number of times (EN -1000 times).
TECHNICAL SPECIFICATIONS
• Hot water temperature: 50 ° C… 75 ° C
• Cold water temperature: 10 ° C … 20 ° C
• Water flow: 2lt / min …. 26 lt / min
• Plc 16Bit: 50 msec machine cycle 16 + 16 digital in / out 4 analog input
• Power supply: 380 V – 50/60 Hz 3ph total power: 4500W
• Dimensions: width 2000 mm height 2150 mm depth 1420 mm
• Weight: 350 Kg
STANDARDS
EN 14688 5.4 – 1 Washbasins – Resistance to temperature change
EN 14688 5.9 Washbasins – Determination of the capacity of the overflow
EN 14528 5.4 – 2 Bidet – Determination of the overflow capacity
NF D 14-503 5 Resistance of the enamelled surface to thermal shock
ADDITIONAL TESTS
EN 13310 5.4 – Kitchen sink – resistance to temperature change
EN 14527 8.3 – Kitchen sink – resistance to temperature change
EN 13310 5.9 – Shower tray – resistance to temperature change
NF D14-503 – sink, shower tray, kitchen sink – resistance to thermal shock of glazed surfaces
| Code | Model | External dimensions | Power | Voltage | Weight |
|---|---|---|---|---|---|
| GT2453 | SHOCK-TECH-SAN | 2000x150x1420 mm | 4500 W | 380 V - 50/60 Hz 3ph | 350 Kg |
| Code | Description | Image |
|---|
Related products
Load-tec module for sanitary ware
Description:
The LOADTECH MODULE is produced to accomplish the static load test on WC and wash basin. With additional floor tools the machine is suitable to…
Category:
Miscellaneous EquipmentStandard:
EN 997Laboratory:
Sanitarywares LabThe LOADTECH MODULE is produced to accomplish the static load test on WC and wash basin. With additional floor tools the machine is suitable to do Static Load test on pedestral WC , Bidet, Shower Tray and Kitchen Sink.
Leak-tec module for sanitary ware
Description:
The LEAK-TECH module is designed to perform tests on all types of toilets to avoid leaks of liquids or potential contaminated vapors.
Category:
Miscellaneous EquipmentStandard:
EN 997Laboratory:
Sanitarywares LabThe LEAK-TECH module is designed to perform tests on all types of toilets to avoid leaks of liquids or potential contaminated vapors.
Flush-tec module for sanitary
Description:
The FLUSH-TECH module is designed to perform drainage tests, basin washing and outdoor splashing according to EN 997 and AS 1172.1
Category:
Miscellaneous EquipmentLaboratory:
Sanitarywares LabThe FLUSH-TECH module is designed to perform drainage tests, basin washing and outdoor splashing according to EN 997 and AS 1172.1
Seat-Tec Module for Sanitary Ware
Description:
Test module for testing toilet seats as durability tests, static load tests, lateral load tests.
Category:
Miscellaneous EquipmentStandard:
Test module for testing toilet seats as durability tests, static load tests, lateral load tests.