Slipperiness Static Pull-Meter SS ISO-ASTM
Categories
SlipperinessInstrument for the measure the dry and wet static coefficient of friction on dry and wet surface. The electronic control display shown the max force friction in kg and calculation the mean values and the static coefficient of friction COF.
TECHNICAL SPECIFICATIONS
• Electric panel with printer
• Power supply: 230 V – 50/60 hz single phase
• 25Kg load cell
EQUIPMENT GT1454 Pull-Meter SS ISO
• Electrical panel with microprocessor and printer
• Nr. 1 weight of galvanized steel 4.5 kg
• Nr. 1 wooden base with 4S rubber for test ISO 10545 17 annex B
• 25 Kg load cell
EQUIPMENT GT1455 Pull-Meter SS ISO
• Electrical panel with microprocessor and printer
• Nr. 1 weight in galvanized steel of 22 kg (50 lb)
• Thermal printer
• Nr. 2 bases in anodized aluminum and Neolite rubber for ASTM C -1028 – 07 test
• 25 Kg load cell
| Code | Model | External dimensions | Power | Weight |
|---|---|---|---|---|
| GT1455 | PULL-METER SS ASTM | 450x400x290 mm | 23 W | 30 kg |
| GT1454 | PULL-METER SS ISO | 450x370x190 mm | 23 W | 9,5 kg |
| Code | Description | Image |
|---|---|---|
| GT0824 | Kit to transform from ISO to ASTM | |
| GT0825 | Kit calibration ISO 10545 -17 Annex B | |
| GT1168 | Packing of 20 thermal paper rolls for data processor (CM 400) | Open image |
| GT0826 | Kit calibration ASTM C-1028-07 | |
| GT0827 | Wooden base with rubber 4S for draft ISO 10545 -17 Annex B | |
| GT0828 | Anodized aluminium base with Neolite for ASTM C-1028-07 | Open image |
| GT0829 | Detergent Hillyard’s Renovator (quantity 50 cc) | |
| GT1090 | Kit to transform from ASTM to ISO |
Related products
Slipperiness Dynamic Slip BCRA
Description:
Instrument for determining the dynamic coefficient of friction COF built according to the B.C.R.A.
Category:
SlipperinessInstrument for determining the dynamic coefficient of friction COF built according to the B.C.R.A.
Slipperiness Platform DIN EN 16165
Description:
Instrument for determining the dynamic critical angle according to DIN EN 16165: 2021 Annex A / Annex B consisting of a painted steel structure, stainless…
Category:
SlipperinessInstrument for determining the dynamic critical angle according to DIN EN 16165: 2021 Annex A / Annex B consisting of a painted steel structure, stainless steel tilting surface to support a test panel with maximum dimensions max 60x120 cm.