ISO
International Organization for Standardization
ISO 148-1
Metallic materials — Charpy pendulum impact test
Impact Tester Charpy
Description:
Mechanical precision instrument to measure the impact resistance of ceramic samples according to the Standard UNI 4543/2 4.10.
Category:
ImpactLaboratory:
Tableware labMechanical precision instrument to measure the impact resistance of ceramic samples according to the Standard UNI 4543/2 4.10.
ISO 868
Determination of indentation hardness by means of a durometer (Shore hardness) in Plastic and ebonite
Durometer Shore
Description:
Pocket Shore durometer, allow to measure the hardness of rubber, cautchou, and soft plastic material using the Shore A measuring unit, and ridgid plastic material…
Category:
Miscellaneous EquipmentLaboratory:
Pocket Shore durometer, allow to measure the hardness of rubber, cautchou, and soft plastic material using the Shore A measuring unit, and ridgid plastic material unsing the Shore D measuring unit.
ISO 2813
Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
Glossmeter GM-20-60
Description:
Instrument to establishing the specular gloss on the ceramic tiles, building material and finish, quality control of paint or ink, plastics, wood furniture, paper (coloured,…
Category:
Chemical-Phisical Properties Gloss ControlInstrument to establishing the specular gloss on the ceramic tiles, building material and finish, quality control of paint or ink, plastics, wood furniture, paper (coloured, rolled, painted), nylon, rubber, leather, photographic films, etc.
Glossmeter GM 20-60-85
Description:
Instrument to establishing the specular gloss on the abraded tiles, marble, granito, glass, paint, wood and specular surfaces.
Category:
Chemical-Phisical Properties Gloss ControlInstrument to establishing the specular gloss on the abraded tiles, marble, granito, glass, paint, wood and specular surfaces.
ISO 3310
Test sieves - Technical requirements and testing Test sieves of metal wire cloth
Set of Nr.7 Standard Sieves Ø 200 MM
Description:
Stainless steel sieves Ø 200mm x 50mm to determine the granulometry of a product by wet or dry sieving.
Category:
GranulometryStainless steel sieves Ø 200mm x 50mm to determine the granulometry of a product by wet or dry sieving.
Sieves Ø 200×50 MM
Description:
Series of sieves Ø 200x50 mm marked with serial number for traceability and accompanied by a certificate of conformity according to ISO 3310
Category:
GranulometrySeries of sieves Ø 200x50 mm marked with serial number for traceability and accompanied by a certificate of conformity according to ISO 3310
ISO 4543/2
Metallic and other non-organic coatings — General rules for corrosion tests applicable for storage conditions
Impact Tester Charpy
Description:
Mechanical precision instrument to measure the impact resistance of ceramic samples according to the Standard UNI 4543/2 4.10.
Category:
ImpactLaboratory:
Tableware labMechanical precision instrument to measure the impact resistance of ceramic samples according to the Standard UNI 4543/2 4.10.
ISO 13007-2
Ceramic tiles - Grouts and adhesives - Part.2: Test methods for adhesives
Shear Adhesion Test
Description:
Instrument to determine the shear adhesion strenght of dispersion ceramic tile adhesives.
Category:
Strength Testers - MOR Accessories For Strenght TesterLaboratory:
Ceramic Tiles LabInstrument to determine the shear adhesion strenght of dispersion ceramic tile adhesives.
ISO 13320
Particle size analysis - Laser diffraction methods
Particle Size Analyzer Mastersize 3000 Series
Description:
Compact laser granulometer with exceptional performance. Measuring range: 0.01 μm - 3500 μm covered with single optics.
Category:
GranulometryStandard:
ISO 13320Laboratory:
Raw Materials LabCompact laser granulometer with exceptional performance. Measuring range: 0.01 μm - 3500 μm covered with single optics.
ISO 16282:2007
Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature
Abrasimeter Refractories
Description:
Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature
Category:
AbrasionLaboratory:
Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature