EN

European Standards

CEN TC 134 (Draft 134 WI 033)

Resilient and textile floor coverings

  • Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and…

    Tribometer GMG-200

    Description:

    Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and EN 13893.

    COD: GT1558

    Category:

    Slipperiness

    Laboratory:

    Ceramic Tiles Lab

    Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and EN 13893.

  • EN 100 (Replaced)

    Ceramic tiles. Determination of modulus of rupture (Replaced by : UNI EN ISO 10545-4)

    EN 101 (Withdrawal)

    Determination of scratch hardness of surface according to Mohs (Withdrawal)

  • Instrument to determine the hardness on ceamic materials.

    Mohs Pencils and Minerals

    Description:

    Instrument to determine the hardness on ceamic materials.

    COD: GT0118 GT0120

    Category:

    Abrasion

    Instrument to determine the hardness on ceamic materials.

  • EN 202

    Determination of frost resistance

  • Instrument for frost test resistance on ceramic tiles, roof or a similar products.

    Climatic Cell

    Description:

    Instrument for frost test resistance on ceramic tiles, roof or a similar products.

    COD: GT1890 GT2119 GT1039

    Category:

    Climatic Chambers

    Instrument for frost test resistance on ceramic tiles, roof or a similar products.

  • Instrument for frost test resistance on ceramic tiles, roof or a similar products. The samples are tested with a programmable…

    Climatic Cell PRO

    Description:

    Instrument for frost test resistance on ceramic tiles, roof or a similar products. The samples are tested with a programmable series of thermal cycles by…

    COD: GT1039

    Category:

    Climatic Chambers

    Instrument for frost test resistance on ceramic tiles, roof or a similar products. The samples are tested with a programmable series of thermal cycles by repeated immersions or water spraying.

  • EN 993-20

    Determination of the abrasion resistance of shaped refractory materials at ambient temperature.

  • Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature

    Abrasimeter Refractories

    Description:

    Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature

    COD: GT1321

    Category:

    Abrasion

    Laboratory:

    Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature

  • EN 997

    Freestanding pots and matching cisterns, with integrated siphon

    EN 1024/A

    Determination of geometric characteristics (Tiles, discontinuous roofing)

  • Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

    Roof Dimension

    Description:

    Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

    COD: GT1171 GT1172

    Category:

    Dimension

    Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

  • Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of…

    Planarity Measurer

    Description:

    Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and…

    COD: GT1224 GT1887

    Category:

    Dimension Planarity Control

    Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and cross straightness of flat brick roof tiles, decorative flat tiles, with side joint, side and front joint, channel-type and tiles of every size.

  • EN 1024/B

    Determination of geometric characteristics (Tiles, discontinuous roofing)

  • Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

    Roof Dimension

    Description:

    Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

    COD: GT1171 GT1172

    Category:

    Dimension

    Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

  • Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of…

    Planarity Measurer

    Description:

    Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and…

    COD: GT1224 GT1887

    Category:

    Dimension Planarity Control

    Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and cross straightness of flat brick roof tiles, decorative flat tiles, with side joint, side and front joint, channel-type and tiles of every size.

  • EN 1097-08

    Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • EN 1184

    Test methods for translucency of ceramic articles

  • Portable spectrophotometer with sphere geometry and horizontal alignment, ideal for measuring the color of flat or large samples. They use…

    Spectrophotometer CM-2500 D

    Description:

    Portable spectrophotometer with sphere geometry and horizontal alignment, ideal for measuring the color of flat or large samples. They use patented gloss numerical control system…

    COD: GT1339

    Category:

    Chemical-Phisical Properties Color Control

    Portable spectrophotometer with sphere geometry and horizontal alignment, ideal for measuring the color of flat or large samples. They use patented gloss numerical control system (NGC), which provides simultaneous measurement in (SCI) and (SCE).

  • EN 1324

    Determination of adhesion by shear stress of dispersion adhesives

  • Instrument to determine the shear adhesion strenght of dispersion ceramic tile adhesives.

    Shear Adhesion Test

    Description:

    Instrument to determine the shear adhesion strenght of dispersion ceramic tile adhesives.

    COD: GT1336

    Category:

    Strength Testers - MOR Accessories For Strenght Tester

    Laboratory:

    Ceramic Tiles Lab

    Instrument to determine the shear adhesion strenght of dispersion ceramic tile adhesives.

  • EN 1338

    Concrete blocks for floors

  • Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of…

    Abrasimeter Bohme

    Description:

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

    COD: GT1387

    Category:

    Abrasion

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

    Abrasimeter Deep Stone

    Description:

    Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

    COD: GT0112

    Category:

    Abrasion

    Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

  • EN 1339

    Concrete slabs for floors

    EN 1340

    Concrete curbs

  • Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of…

    Abrasimeter Bohme

    Description:

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

    COD: GT1387

    Category:

    Abrasion

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

  • EN 1341

    Natural stone slabs for external paving: requirements and test methods

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • EN 1342

    Natural stone cubes for outdoor paving - Requirements and test methods

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

    Abrasimeter Deep Stone

    Description:

    Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

    COD: GT0112

    Category:

    Abrasion

    Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

  • EN 1344

    Elements for flooring

  • Laboratory instrument to determine the resistance to deep abrasion in the unglazed ceramic tiles.

    Abrasimeter Deep Unglazed

    Description:

    Laboratory instrument to determine the resistance to deep abrasion in the unglazed ceramic tiles.

    COD: GT0109

    Category:

    Abrasion

    Laboratory instrument to determine the resistance to deep abrasion in the unglazed ceramic tiles.

  • EN 1348

    Determination of adhesion by traction on cementitious adhesives

  • Instrument for frost test resistance on ceramic tiles, roof or a similar products.

    Climatic Cell

    Description:

    Instrument for frost test resistance on ceramic tiles, roof or a similar products.

    COD: GT1890 GT2119 GT1039

    Category:

    Climatic Chambers

    Instrument for frost test resistance on ceramic tiles, roof or a similar products.

  • EN 1402-6 (2004)

    Unformed refractory products - Measurement of physical characteristics

  • Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature

    Abrasimeter Refractories

    Description:

    Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature

    COD: GT1321

    Category:

    Abrasion

    Laboratory:

    Laboratory instrument for the determination of the abrasion resistance of shaped refractory materials at ambient temperature

  • EN 1436:1997

    Road marking materials - Road marking performance for road users

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • EN 11128

    Clay construction products - Large hollow flat tiles - Terminology, requirements and test methods

  • Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of…

    Planarity Measurer

    Description:

    Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and…

    COD: GT1224 GT1887

    Category:

    Dimension Planarity Control

    Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and cross straightness of flat brick roof tiles, decorative flat tiles, with side joint, side and front joint, channel-type and tiles of every size.

  • EN 12372

    Determination of the flexural strength under concentrated load

    EN 12697-6

    Determination of the bulk density of bituminous specimens

  • new
    Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

    Densimeter Apparent Porosity

    Description:

    Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

    COD: GT2348

    Category:

    Density Water Absorption

    Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

  • EN 12697-7

    Determination of the apparent density of bitumen specimens by gamma rays

  • new
    Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

    Densimeter Apparent Porosity

    Description:

    Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

    COD: GT2348

    Category:

    Density Water Absorption

    Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

  • EN 12825-5.2

    Raised floors - static load test

  • new
    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles.…

    Flexi 3000 – 1250 raised access floors

    Description:

    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of…

    COD:

    Category:

    Strength Testers for Fired/Unfired Tiles

    Laboratory:

    Ceramic Tiles Lab

    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of a steel base where there are oscillating supports (knives) adjustable in width on which the specimen is positioned.

  • EN 12825-5.3

    Raised access floors - vertical load test on column

  • new
    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles.…

    Flexi 3000 – 1250 raised access floors

    Description:

    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of…

    COD:

    Category:

    Strength Testers for Fired/Unfired Tiles

    Laboratory:

    Ceramic Tiles Lab

    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of a steel base where there are oscillating supports (knives) adjustable in width on which the specimen is positioned.

  • EN 12825-5.4

    Raised floors - permanent deformation test on the element

  • new
    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles.…

    Flexi 3000 – 1250 raised access floors

    Description:

    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of…

    COD:

    Category:

    Strength Testers for Fired/Unfired Tiles

    Laboratory:

    Ceramic Tiles Lab

    Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of a steel base where there are oscillating supports (knives) adjustable in width on which the specimen is positioned.

  • EN 13258

    Materials and articles in contact with food: Test methods for the resistance to crazing of ceramic articles

    EN 13892-3

    Determination of wear resistance - Böhme

  • Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of…

    Abrasimeter Bohme

    Description:

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

    COD: GT1387

    Category:

    Abrasion

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

  • EN 13893

    Measurement of the dynamic coefficient of friction on dry floor surfaces

  • Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and…

    Tribometer GMG-200

    Description:

    Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and EN 13893.

    COD: GT1558

    Category:

    Slipperiness

    Laboratory:

    Ceramic Tiles Lab

    Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and EN 13893.

  • EN 14157-2017

    Test methods for natural stones: Determination of resistance to abrasion

  • Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of…

    Abrasimeter Bohme

    Description:

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

    COD: GT1387

    Category:

    Abrasion

    Instrument for measure a volume loss in a specimen under abrasion test on paving stones, concrete slabs, slabs made of natural rocks, natural stone slabs.

  • Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

    Abrasimeter Deep Stone

    Description:

    Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

    COD: GT0112

    Category:

    Abrasion

    Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone.

  • EN 14158

    Determination of the breaking energy

  • Instrument for determining the energy of ropture by impact of natural stone.

    Impact Test Natural Stones

    Description:

    Instrument for determining the energy of ropture by impact of natural stone.

    COD: GT1350

    Category:

    Impact

    Instrument for determining the energy of ropture by impact of natural stone.

  • EN 14231

    Determination of the slip resistance with Pendulum test equipment

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • EN 14581:2005 (method A)

    Determination of the thermal linear expansion coefficient

  • Equipment for determining the linear thermal expansion on natural stones according to method A of the EN 14581: 2005 standard

    Dilatometer For Natural Stone

    Description:

    Equipment for determining the linear thermal expansion on natural stones according to method A of the EN 14581: 2005 standard

    COD: GT1170

    Category:

    Dilatometry

    Equipment for determining the linear thermal expansion on natural stones according to method A of the EN 14581: 2005 standard

  • EN 16165:2021 annex A

    Determination of the slip resistance of pedestrian surfaces. Barefoot test with inclined platform.

    EN 16165:2021 annex B

    Determination of the slip resistance of pedestrian surfaces. Tests with shoes with an inclined platform.

    EN 16165:2021 Annex C

    Determination of the slip resistance of pedestrian surfaces. Pendulum friction test.

  • Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles…

    Pendulum

    Description:

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

    COD: GT0818

    Category:

    Slipperiness

    Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

  • EN 16165:2021 Annex D

    Determination of the slip resistance of pedestrian surfaces. Tribometer test.

  • Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and…

    Tribometer GMG-200

    Description:

    Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and EN 13893.

    COD: GT1558

    Category:

    Slipperiness

    Laboratory:

    Ceramic Tiles Lab

    Tribometer is a mobile instrument for measuring the coefficient of sliding friction of floorings conforming to DIN standard 51131 and EN 13893.

  • This site is registered on wpml.org as a development site.