Flexi 3000
Instrument for determining the max load and modulus of rupture M.O.R. and flexion. The semiautomatic instrument consists of a steel base where there are oscillating supports (knives) adjustable in width on which the specimen is positioned. The upper knife (with electronically adjustable speed as required by the standards) descends until it touches the specimen and then applies a force that compresses it until it breaks. Change up to 2 cells with automatic recognition.
The Flexi is produced in two versions:
FLEXI STD: The lower supports (knives) are adjusted in width by manually positioning them inside the holes on the top.
FLEXI PRO: The lower supports (knives) are semi-automatically adjusted in length by operating a practical handwheel. In this version, the accessory may be required that allows the extraction of the two lower supports for easier and more precise positioning of the specimen, limiting the consumption of the rubber coating.
The touch screen accessory can be requested for both STD or MOV versions.
The instrument is produced according to the UNI EN ISO 10545-4 STANDARD (other standards on request).
TECHNICAL SPECIFICATIONS
• Easy moving base patent N°0000279110
• Adjustable and extractable supports rods PATENT N° 202016000095039
• Adjustable speed and programmable
• Max load applicable: 3000 Kg
• Change up to 2 load cells with auto-recognition
• Resolution on display: 100 g (wit h load cell 3000 kg) 10 g (wit h load cell 100 kg)
• Max applied load is shown in Kg or da N
• Electro-mechanical operation
• Flexi Mov: Positioning of the support with crank
• Load applied is programmable thus enabling to meet requirements
• Automatic calculation of the S and δ
• Plexiglass safety protection with micro switch
• Software for the recording of the test, graphic showing time-load, the storage of the tests made
• Internal printer
• Supply: 230 V- 50 Hz single phase (other voltage on request)
• Possibility to do a deflection with a additional kit
EQUIPMENT
• Load cell: 3000 kg with knife
• Software and connection cable RS-232/USB for PC
| Code | Model | Tile format | External dimensions | Maximum force applied | Power | Weight |
|---|---|---|---|---|---|---|
| GT1657 | FLEXI 3000 LX-650 STD | 100x100÷ 650x650 mm | 800x700x950 mm | 3000 Kg | 400 W | 180 Kg |
| GT1559 | FLEXI 3000 LX-650 PRO | 100x100÷ 650x650 mm | 800x700x950 mm | 3000 Kg | 400 W | 200 Kg |
| GT1279 | FLEXI 3000 LX-950 STD | 100x100÷ 950x950 mm | 1150x1050x1050 mm | 3000 Kg | 400 W | 220 Kg |
| GT1560 | FLEXI 3000 LX-950 PRO | 100x100÷ 950x950 mm | 1150x1050x1050 mm | 3000 Kg | 400 W | 240 Kg |
| GT1561 | FLEXI 3000 LX-1250 PRO | 100x100÷ 1250x1250 mm | 1550x1450x1200 mm | 3000 Kg | 400 W | 380 Kg |
| GT1436 | FLEXI 3000 LX-1250 STD | 100x100÷ 1250x1250 mm | 1350x1250x1050 mm | 3000 Kg | 400 W | 340 Kg |
| GT1758 | FLEXI 3000 LX-1250x1900 PRO | 100x100÷ 1250x1900 mm | 2150x1410x1180 mm | 3000 Kg | 400 W | 450 Kg |
| Code | Description | Image |
|---|---|---|
| GT2663 | Kit knives L = 650 mm and load cell up to 200 Kg | |
| GT2575 | Kit knives L = 650 mm and load cell up to 200 Kg | |
| GT2576 | Kit knives L = 1250 mm and load cell up to 200 Kg | |
| GT1699 | Deflection Kit - Flexi 3000 Lx - 650 | |
| GT1700 | Deflection Kit - Flexi 3000 Lx - 950 | |
| GT1625 | Deflection Kit - Flexi 3000 Lx - 1250 | |
| GT1705 | Calibration report box by ACCREDIA for 3000 Kg | Open image |
| GT1706 | Calibration report by ACCREDIA for load cell 3000 Kg | Open image |
| GT1621 | Kit knives L: 650 mm for UNI EN 14617-2; UNI EN 12372; EN 1339 | |
| GT1562 | Kit knives L: 950 for UNI EN 14617-2; 12372;1339, 1340 | |
| GT1622 | Kit knives L: 1250 for UNI EN 14617-2; 12372;1339 | |
| GT1931 | Extractables Support Knives Kit - Flexi 3000 LX-650 PRO | Open image |
| GT1932 | Extractables Support Knives Kit - Flexi 3000 LX-950 PRO | Open image |
| GT1933 | Extractables Support Knives Kit - Flexi 3000 LX-1250 PRO | Open image |
| GT0256 | Kit for ASTM C 648 | Open image |
| GT1168 | Packing of 20 thermal paper rolls for data processor (CM 400) | Open image |
| GT1467 | Minidin Electronic Microprocessor | Open image |
| GT1532 | Touch screen | Open image |
| GT1546 | Touch screen with support | Open image |
Related products
Flexi 2000
Description:
Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 2000 Kg.
Category:
Strength Testers - MOR Strength Testers for Fired/Unfired TilesLaboratory:
Ceramic Tiles LabSemi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 2000 Kg.
Flexi 5000
Description:
Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 5000 Kg.
Category:
Strength Testers - MOR Strength Testers for Fired/Unfired TilesSemi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 5000 Kg.
Touch Screen with support For Flexi
Description:
The touch screen accessory allows to control, program, execute and display the test in a more intuitive and ergonomic way (available for FLEXI lines).
Category:
Strength Testers - MOR Accessories For Strenght TesterStandard:
Laboratory:
The touch screen accessory allows to control, program, execute and display the test in a more intuitive and ergonomic way (available for FLEXI lines).
Flexi 3000 – 1250 raised access floors
Description:
Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of…
Category:
Strength Testers for Fired/Unfired TilesLaboratory:
Ceramic Tiles LabInstrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of a steel base where there are oscillating supports (knives) adjustable in width on which the specimen is positioned.