ISO 10545

Plucometer for the vertical measurement of the dimensional characteristics on tiles according to ISO 10545-2. Data detection through digital comparators connected via wireless to a pc / notebook (personal computer included). Particularly suitable for testing large size tiles with reduced thickness because it avoids detection errors due to sample bending caused by the weight force.

Plucometer for the horizontal measurement of the dimensional characteristics on the tiles according to ISO 10545-2. Data detection through digital comparators connected via wireless to a pc / notebook (personal computer included).

Plucometer for the horizontal measurement of the dimensional characteristics on the tiles according to ISO 10545-2. Data detection through digital comparators connected with cables to an electronic card. Electronic card connected to a pc / notebook (personal computer not included).

Plucometer for the horizontal measurement of the dimensional characteristics on tiles according to ISO 10545-2. Data detection through digital gauges.

Laboratory instrument for determining the dimensional characteristic in the tiles (lenght, hortogonality, glide, warping, straightness of sides, curvature/bending of the sides).

Kit to upgrade from Dimension/Plucometer into Datadimension/Dataplucometer

Calibration plates of DIMENSION / DATAPLUCOM instrumentsETRO and DATADIMENSION - V necessary to detect dimensional differences / errors with ceramic tiles.

Instrument for measuring the thickness on ceramic tiles according to ISO 140545-2 standard

Silica gel drying (EP), suitable for drying in research laboratory.

Laboratory instrument to establish the water absorption under vacuum for ceramic tile specimens according to the cycle of latest UNI EN 10545-3 standard.

DESIGNED AND MANUFACTURED IN COLLABORATION WITH “IL CENTRO CERAMICO”. Laboratory instrument to establishing the water absorption under vacuum of ceramic tiles according to the latest UNI EN ISO 10545-3 for cut material of the size 20x20 cm.

Strumento da laboratorio per stabilire l’assorbimento di acqua sottovuoto nelle piastrelle ceramiche con cicli completamente automatici.

Laboratory instrument to establish the water absorption under vacuum for ceramic tiles according to the cycle of latest UNI EN 10545-3 standard.

Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

Semi-automatic instrument for determining the max load and modulus of rupture and bending on fired/unfired ceramic tiles with maximum applied force up to 800 Kg.

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 1000 Kg.

Concrete knives kit L = 950 mm for UNI EN 14617-2 UNI EN 12372, UNI EN 1339

Accessory kit to perform breaking load test of small tiles according to DIN 51030

Accessory kit to perform breaking load test of small tiles 18x18 ÷ 48x48 mm

Accessory kit to perform breaking load test of small tiles 18x18 ÷ 95x95 mm

Semi-automatic instrument for determining the max load and modulus of rupture and bending on unfired ceramic specimens with maximum applied force up to 150 Kg.

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 2000 Kg.

Semi-automatic instrument for determining the max load and modulus of rupture and bending on unfired ceramic specimens with maximum applied force up to 75 Kg.

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 3000 Kg.

Semi-automatic instrument for determining the max load and modulus of rupture and bending on unfired ceramic tiles with maximum applied force up to 150 Kg.

Instrument for determining the max load and modulus of rupture M.O.R. and bending for standard tiles and raised floor tiles. The semiautomatic instrument consists of a steel base where there are oscillating supports (knives) adjustable in width on which the specimen is positioned.

Semi-automatic instrument for determining the max load and modulus of rupture and bending on unfired ceramic tiles with maximum applied force up to 60 Kg.

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 5000 Kg.

Laboratory instrument for crazing resistance test on glazed ceramic tile specimens.

Laboratory instrument for crazing test on glazed ceramic tiles.

Laboratory instrument for crazing test on glazed ceramic tiles.

Laboratory instrument for crazing test on glazed ceramic tiles.

Laboratory instrument for crazing test on glazed ceramic tiles.

Laboratory instrument for crazing test on glazed ceramic tiles.

Laboratory instrument for crazing test on glazed ceramic tiles.

Laboratory instrument to establish the water absorption under vacuum for ceramic tile specimens according to the cycle of latest UNI EN 10545-3 standard.

DESIGNED AND MANUFACTURED IN COLLABORATION WITH “IL CENTRO CERAMICO”. Laboratory instrument to establishing the water absorption under vacuum of ceramic tiles according to the latest UNI EN ISO 10545-3 for cut material of the size 20x20 cm.

Strumento da laboratorio per stabilire l’assorbimento di acqua sottovuoto nelle piastrelle ceramiche con cicli completamente automatici.

Laboratory instrument to establish the water absorption under vacuum for ceramic tiles according to the cycle of latest UNI EN 10545-3 standard.

Instrument for frost test resistance on ceramic tiles, roof or a similar products.

Instrument for frost test resistance on ceramic tiles, roof or a similar products. The samples are tested with a programmable series of thermal cycles by repeated immersions or water spraying.

The Colorimeter 200 pro is a portable instrument, practical to carry in your hand or pocket in any situation, in the quality control laboratory or in the production plant.

Portable instrument for spectral analysis colour in ceramic industry and other many sectors (wood, paint, etc,)

The portable sphere spectrophotometer IC-64 is designed to measure and detect the colour quality in all stages of production.

The CM-23d is a portable sphere type spectrophotometers with horizontal alignment, which is most convenient to measure the colour of flat or large samples.

Portable spectrophotometer with sphere geometry and horizontal alignment, ideal for measuring the color of flat or large samples. They use patented gloss numerical control system (NGC), which provides simultaneous measurement in (SCI) and (SCE).