BRICKS-ROOF TILES

High precision tool for measuring abrasion resistance for rubbing of materials such as ceramics, metals, painted or lacquered surfaces and electroplated, plastic-coated materials, textile products from pure silk to heavy upholstery, leather, rubber and linoleum.

For marking test pieces, samples,refractory materials, porcelain, pvc, stone, glass, etc. It can working up to 1300 °C. Available white or black colour (to specify at order).

Spectrocolorimeter CM-420 series develops new color measurement method of colorimeter with build-in camera

The iCE 3300 Atomic Absorption Spectrometer, single flame atomizer system with fully automatic gas box provides a complete elemental analysis solution incorporating simplicity and an innovative design to achieve superior performance makes even the most complicated analyses simple.

The S1 TITAN series is designed to quickly and accurately report the elemental analysis of your sample for deliver fast and accurate results.

X-ray fluorescence XRF analyzer ideal analytical solution for simple identification and quantification of elements up to more sophisticated analyzes. Easy to use, compact and safe instrument without the need for additional chemicals or operating gases with an integrated sample holder consisting of: spectrometer, integrated computer, touch screen, analysis software.

Top of the range bench spectrometer with excitation capacity 50 kV, 2 mA, maximum power 10 W, Ag anode X-ray tube, high resolution silicon drift detector (SDD) with ultra-thin Be window for the analysis of ultralight elements (eg. F). 10-position sample tray with 10 standard sample holders and a set of inserts, sample spinner, helium (He) purge system, USB interface cable, 64-bit pc with microphone. The wind. Operating system (including monitor)

The portable sphere spectrophotometer IC-64 is designed to measure and detect the colour quality in all stages of production.

Spectrocolorimeter CM-420 series develops new color measurement method of colorimeter with build-in camera

The portable sphere spectrophotometer IC-64 is designed to measure and detect the colour quality in all stages of production.

Instrument for frost test resistance on ceramic tiles and similar products according to the standard ASTM C1026-13 (reapproved 2018)

Instrument for frost test resistance on ceramic tiles, roof or a similar products.

Instrument for frost test resistance on ceramic tiles, roof or a similar products. The samples are tested with a programmable series of thermal cycles by repeated immersions or water spraying.

Innovative instrument for measuring the density of a solid as a result of the ratio between the weight of the sample in air and its buoyancy when immersed in a non-toxic liquid.

Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

Laboratory instrument to determine the apparent density (porosity) of raw ceramic tiles by means of mercury.

Portable, economy and fast instruments for the determination of the hardness of clays.

Laboratory instrument for the control of shape regularity (flatness) on brick roof tiles.

Analog caliper in stainless steel with lever locking or micrometric screw.

Portable instrument easy to use for quick thickness measuring.

Portable instrument easy to use for quick thickness tile and stone measuring.

Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and cross straightness of flat brick roof tiles, decorative flat tiles, with side joint, side and front joint, channel-type and tiles of every size.

Analog caliper in stainless steel with lever locking or micrometric screw.

Portable instrument easy to use for quick thickness measuring.

Portable instrument easy to use for quick thickness tile and stone measuring.

Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and cross straightness of flat brick roof tiles, decorative flat tiles, with side joint, side and front joint, channel-type and tiles of every size.

Stove with forced air circulation, table (STV) or floor type (SPV) model, suitable for heating and/or drying in laboratory tests. Max temperature 290 °C.

Stove with natural convection, table (STN) or floor type (SPN) model, suitable for heating and/or drying laboratory tests. Max temperature 290 °C.

EXCLUSIVE instrument for data recording in real-time of weight loss, shrinkage and internal temperature of a ceramic sample, or other material, subjected to a drying cycle in a room controlled in temperature and humidity.

Silica gel drying (EP), suitable for drying in research laboratory.

The kiln consists of a sturdy steel structure, which encloses the thermal insulation, consisting of low density refractory bricks and preformed ceramic fibre sheets, highly resistant to high temperature and thermal shock.

Muffle kilns for laboratory made of sheet-steel painted with epoxy powder and insulation with double layer of ceramic fibre. Easy to operate and economical kiln for laboratory tests with a max temperature 1050 °C or 1250 °C

Laboratory roller kiln permits simulation of any firing cycle, faithfully reproduing the required operating conditions.

The kiln consists of a sturdy steel structure, which encloses the thermal insulation, consisting of low density refractory bricks and preformed ceramic fibre sheets, highly resistant to high temperature and thermal shock.

Laboratory roller kiln permits simulation of any firing cycle, faithfully reproduing the required operating conditions.

Muffle kilns for laboratory made of sheet-steel painted with epoxy powder and insulation with double layer of ceramic fibre. Easy to operate and economical kiln for laboratory tests with a max temperature 1050 °C or 1250 °C

Laboratory instrument for the dry grinding of medium -high hardness material as granite, feldspar, chamotte, gres, etc.

Laboratory instrument for the dry grinding of medium - high hardness material such as granite, feldspar, chamotte, gres, etc.Production of grit with medium - fine granulometry.

Rotating cylinder machine to shutter britte and medium-hard materials such as clays, grogs, kaolins, etc.

Pug mill for clay body. Made of stainless steel AISI 304.It comes complete with manual cutter, slide support clay pug mill and vacuum pump oil.

Hydraulic press for laboratory or for small productions of special pieces. Produced in three different versions of 80,120, 225 t of max force and suitable for producing ceramic tiles, laboratory samples, refractories, bricks, etc. The press is supplied without a mold, to be ordered separately.

Press 250 kN / 25 Ton with control unit for semi-automatic control suitable for carrying out compression tests on portions of prism 40.1x40x160 mm, cubic side 40, 50, 70, 100 mm and 2 "; samples with max. of 180 mm.

Press for compression tests, capacity 2000 kN / 203 Ton, motorized with touch-screen control unit (semi-automatic model), to test blocks max. 500x300 mm, cubes up to 300 mm per side and cylinders up to Ø 160x320 mm.

Instrument for determining slipperiness according to a wide range of international standards. The device measure the slip resistance of tiles and pedestrian walkways.

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 1000 Kg.

Kit Accessory used for measuring the breaking strenght on roof tile according UNI EN 12372

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 1000 Kg.

Kit Accessory used for measuring the breaking strenght on roof tile according UNI EN 12372

Infrared Thermometer for simple and accuracy measuring temperature without contact with laser aim on through K thermocouple with measuring range - 33 ÷ +500 °C

Infrared Thermometer for simple and accuracy measuring temperature without contact with laser aim on through K thermocouple with measuring range - 33 ÷ +1000 °C

Digital contact thermometer with interchangeable thermocouple K type. Measuring range 250 ÷ +1372 °C (- 418 ÷ + 2501° F).

Infrared thermometer for simple and accuracy measuring temperature without contact with laser aim. Measuring range 385 +1600 °C

Used for specific gravity determination of tiles, concrete, aggregates, natural stone etc.

Precision electronic balances single range with milligram, centigram, decigram resolutions.

Single and double scale precision industrial electronic scales with resolution to decigram, gram and decigram / gram.

Analogic chronometer with movement on rubies or digital with quartz movement.

Spectrocolorimeter CM-420 series develops new color measurement method of colorimeter with build-in camera

The portable sphere spectrophotometer IC-64 is designed to measure and detect the colour quality in all stages of production.

Analog caliper in stainless steel with lever locking or micrometric screw.

Portable instrument easy to use for quick thickness measuring.

Portable instrument easy to use for quick thickness tile and stone measuring.

Instrument suitable to determine the side flatness along the diagonal and straightness of the edges in brick hollow tiles of every size and longitudinal and cross straightness of flat brick roof tiles, decorative flat tiles, with side joint, side and front joint, channel-type and tiles of every size.

The kiln consists of a sturdy steel structure, which encloses the thermal insulation, consisting of low density refractory bricks and preformed ceramic fibre sheets, highly resistant to high temperature and thermal shock.

Laboratory roller kiln permits simulation of any firing cycle, faithfully reproduing the required operating conditions.

Muffle kilns for laboratory made of sheet-steel painted with epoxy powder and insulation with double layer of ceramic fibre. Easy to operate and economical kiln for laboratory tests with a max temperature 1050 °C or 1250 °C

Semi-automatic instrument for the determination of the max load, modulus of rupture and bending with applied force up to 1000 Kg.

Kit Accessory used for measuring the breaking strenght on roof tile according UNI EN 12372